ASU Fulton School of Engineering ASU
ASU Logo  
Fulton HomeASU Home
Photos of Arizona
Home | General | Interests | Research | Teaching | Service
Douglas C. Montgomery
Department of Industrial Engineering
Ira A. Fulton School of Engineering
Arizona State University, Tempe, AZ 85287-5906
Phone: +1 (480) 965-3836;Fax: +1 (480) 965-8692
E-Mail: doug.montgomery@asu.edu
  

Research
Funded Research
Textbooks
Research Books and Edited Volumes
Refereed Journal Publications
Chapters in Books
Papers in Conference Proceedings
Papers and Presentations at Meetings
Other Publications

Funded Research

  1. Collaborative Research: Hierarchical Modeling of Yield and Defectivity to Improve Factory Operations, NSF/SRC/ISMT, 2004-2007, co-principal investigator, $300,000.
  2. Collaborative Research: Monitoring Product and Product Quality Profiles, NSF, 2004-2005, co-principal investigator, $100,000.
  3. Generalized Linear Model-Based Process Control for Multivariate Measurements, National Science Foundation, 1999-2003, co-principal investigator, $211,000.
  4. NSF IUERC in Quality & Reliability Engineering, 1997-2001, co-director and co-principal investigator. ASU share of annual center funding was approximately $150,000.
  5. Research in Industrial Statistics (projects/graduate student research) sponsored by various organizations including Chrysler Electronics, Kellogg Corporation, SGS Thompson, and the Dial Corporation, 1996-1998, co-principal investigator, $231,000.
  6. Funding for Editorial Operation of JQT, ASQC, 1994-1997, principal investigator, $315,000.
  7. Graduate Education in Engineering for Women and Minorities, National Science Foundation, 1992-1997, co-principal investigator, $850,000.
  8. Process Control Methodology for the Hall Process, Alcoa, 1991, principal investigator, $65,000.
  9. Implementation of Design of Experiments, Allied-Signal Aerospace, 1989, principal investigator, $40,000.
  10. Statistical Methods for Quality and Process Improvement, IBM Corporation, 1985-1988, principal investigator, $450,000.
  11. Process Control and Optimization Studies for Substrate Manufacturing, IBM Corporation, 1985, principal investigator, $67,000.
  12. Quality and Process Control in the Factory of the Future, Boeing Electronics Company, 1986, principal investigator, $25,000.
  13. Statistical Modeling and Analysis in Quality Assurance, Office of Naval Research, 1979-1985, principal investigator, $320,000.
  14. Determination of International Differences in Reported Fire Losses: Update and Extensions, National Fire Data Center , U.S. fire Administration, 1981, co-principal investigator, $50,000.
  15. Factor Screening Designs in Computer Simulation Experiments, Office of Naval Research, 1978, principal investigator, $25,000.
  16. Studies in Support of the Application of Statistical Methodology to the Design and Evaluation of Operational Tests, Department of the Army, Harry Diamond Laboratories, 1977, co-principal investigator, $45,000.
  17. Studies in Support of the Application of Statistical Theory and Methodology to the Design and Evaluation of Operational Tests, Department of the Army, Harry Diamond Laboratories, 1976, co-principal investigator, $56,000.
  18. Research Support on Method-Model Development, U.S. Army Material Systems Agency, 1976, co-principal investigator, $15,000.
  19. Operational Testing of Complex Command and Control Systems, Department of the Army, Harry Diamond Laboratories, 1974-1975, principal investigator, $15,000.
Textbooks
  1. Montgomery, D. C. (2005), Design and Analysis of Experiments, 6th edition, John Wiley & Sons , New York . (1st edition, 1976, 2nd edition, 1984, 3rd edition, 1991, 4th edition, 1997. 5th edition, 2001).
  2. Montgomery, D. C. (2005), Introduction to Statistical Quality Control, 5th edition, John Wiley & Sons, New York. (1st edition, 1985, 2nd edition, 1991, 3rd edition 1996, 4th edition 2001).
  3. Montgomery, D. C., Runger, G. C., and Hubele, N. F. (2004), Engineering Statistics, 3rd edition, John Wiley & Sons, New York (1st edition, 1998, 2nd edition 2001).
  4. Montgomery, D. C. and G. C. Runger (2006), Applied Statistics and Probability for Engineers, 4th edition, John Wiley & Sons , New York (1st edition, 1994, 2nd edition, 1999, 3rd edition, 2003).
  5. Hines, W. W., D. C., Montgomery , Goldsman, D. M., and Borror, C. M. (2003), Probability and Statistics in Engineering, 4th edition, John Wiley & Sons , New York (1st edition 1972, 2nd edition 1980, 3rd edition 1990).
  6. Myers, R. H., Montgomery, D. C., and Vining, G. G. (2002), Generalized Linear Models with Applications in Engineering and the Sciences, John Wiley & Sons, New York (Probability and Statistics Series).
  7. Myers, R. H. and D. C. Montgomery (2002), Response Surface Methodology: Process and Product Optimization Using Designed Experiments, 2nd edition, John Wiley & Sons , New York (Probability and Statistics Series; 1st edition, 1995).
  8. Montgomery, D. C., Peck, E. A., and Vining, G. G. (2001), Introduction to Linear Regression Analysis, 3rd edition, John Wiley & Sons, New York. (Probability and Statistics Series; 1st edition, 1983, 2nd edition, 1992).
  9. Montgomery, D. C., Johnson, L. A. and J. S. Gardiner (1990), Forecasting and Time Series Analysis, 2nd edition, McGraw-Hill , New York . (1st edition 1976).
  10. Johnson, L. A., and D. C. Montgomery (1974), Operations Research in Production Planning, Scheduling, and Inventory Control, John Wiley & Sons, New York .
Research Books and Edited Volumes
  1. Burdick, R. K., Borror, C. M., and Montgomery, D. C. (2005), Design and Analysis of Gauge R&R Studies: Making Decisions with Confidence Intervals in Random and Mixed ANOVA Models, ASA-SIAM Series on Statistics and Applied Probability, SIAM, Philadelphia, PA, and ASA, Alexandria, VA.
  2. Calado, V. and Montgomery, D. C. (2003), Planejamendo de Experimentos Usando o Statistica, E-Papers Serviços Editoriais Ltda., Rio de Janeiro, Brazil.
  3. Beichelt, F. E. and D, C, Montgomery (editors) (2003), Wahrscheinlichkeitstheorie, Stochastische Prozesse, Mathematische Statistik, B. G. Teubner Verlag, Weisbaden.
  4. Keats, J. B. and D. C. Montgomery (editors) (1996), Statistical Applications in Process Control, Marcel Dekker, New York .
  5. Keats, J. B. and D. C. Montgomery (editors) (1991), Statistical Process Control in Manufacturing, Marcel Dekker, New York .
  6. George, M. L., Gooch, J. and D. C. Montgomery (1986), America Can Compete, SMU Press, Dallas , TX .
Refereed Journal Publications
  1. Montgomery, D. C. (1968), "An Introduction to Short-Term Forecasting," The Journal of Industrial Engineering, Vol. 11, No. 10, pp. 500-504. This paper was also selected for inclusion in Mathematical Models in Marketing, edited by Robert G. Murdick, International Textbook Co. (1971).
  2. Montgomery, D. C. (1969), "An Application of Statistical Forecasting Techniques in an Inventory Control Policy," Production and Inventory Management, Vol. 10, No. 1, pp. 66-73.
  3. Dickey, J. W. and D. C. Montgomery (1970) "A Simulation-Search Technique: An Example Application for Left-Turn Phasing," Transportation Research, Vol. 4, pp. 339-347.
  4. Montgomery, D. C. (1970), "Adaptive Control of Exponential Smoothing Parameters by Evolutionary Operation," AIIE Transactions, Vol. 2, No. 3, pp. 268-269.
  5. Ghare, P. M., D. C. Montgomery and W. C. Turner (1971), "Optimal Interdiction Policy for a Flow Network" Naval Research Logistics Quarterly, Vol. 18, No. 1, pp. 37-45.
  6. Montgomery, D. C. and P. J. Klatt (1972), "Minimum Cost Multivariate Quality Control Tests," AIIE Transactions, Vol. 4, No. 2, pp. 103-110 This paper also appeared in Proceedings of the AIIE Annual Conference, Anaheim , California , June 1972.
  7. Sipper, D. and D. C. Montgomery (1972), "Probability Zones in Stochastic Project Networks," Journal of Systems Management, Vol. 23, No. 8, pp. 36-42.
  8. Montgomery, D. C., J. J. Talavage and C. J. Mullen (1972), "A Response Surface Approach to Improving Traffic Signal Settings in a Street Network," Transportation Research, Vol. 6, pp. 69-80.
  9. Montgomery, D. C. and P. J. Klatt (1972), "Economic Design of T2 Control Charts to Maintain Current Control of a Process," Management Science, Vol. 19, No. 1, pp. 76-89.
  10. Montgomery, D. C., M. S. Bazaraa and A. J. Keswani (1973), "Inventory Models with a Mixture of Backorders and Lost Sales," Naval Research Logistics Quarterly, Vol. 20, No. 2, pp.255-263.
  11. Horwitz, J. S. and D. C. Montgomery (1974), "A Computer Simulation Model of a Rubella Epidemic," Computers in Biology and Medicine, Vol. 4, No. 2, pp. 189-198.
  12. Heikes, R. G., D. C. Montgomery, and J. Young (1974), "Alternative Process Models in the Economic Design of T2 Control Charts," AIIE Transactions, Vol. 6, No. 1, pp. 55-61.
  13. Montgomery, D. C., R. G. Heikes and J. F. Mance (1975), "Economic Design of Fraction Defective Control Charts," Management Science, Vol. 21, No. 11, pp. 1272-1284
  14. Montgomery, D. C. and D. M. Evans, Jr. (1975), "Second-Order Response Surface Designs in Computer Simulation", Simulation, Vol. 26, pp. 169-178.
  15. Heikes, R. G., D. C. Montgomery, and R. L. Rardin (1976), "Using Common Random Numbers in Simulation Experiments--An Approach to Statistical Analysis," Simulation, Vol. 27, No. 3, pp. 81-85.
  16. Montgomery, D. C. and R. G. Heikes (1976), "Process Failure Mechanisms and Optimal Fraction Defective Control Charts," AIIE Transactions, Vol. 8, No. 4, pp. 467-472.
  17. Montgomery, D. C. and L. E. Contreras (1977), "A Note on Forecasting with Adaptive Filtering," Operational Research Quarterly, Vol. 28, No. 1, pp. 87-91.
  18. Montgomery, D. C. (1977), "Discussion of 'Studies in a Simulated Job Shop'" by S. Eilon and I. Chowdhury, Invited Discussion, Proceedings of the Institution of Mechanical Engineers, London, Vol. 189, pp. 185-186.
  19. Montgomery, D. C. and V. M. Bettencourt, Jr. (1977), "Multiple Response Surface Methods in Computer Simulation," Simulation, Vol. 29, No. 4, pp. 113-121.
  20. Stewart, R. D., D. C. Montgomery and R. G. Heikes (1978), "Choice of Double Sampling Plans Based on Prior Distributions and Costs," AIIE Transactions, Vol. 10, No. 1, pp. 19-30.
  21. Montgomery, D. C. (1980), "The Economic Design of Control Charts: A Review and Literature Survey," Journal of Quality Technology, Vol. 12, No. 2, pp. 75-87.
  22. Montgomery, D. C. and R. G. Conard (1980), "Comparison of Simulation and Flight-Test Data for Missile Systems," Simulation, Vol. 31, pp. 63-72.
  23. Montgomery, D. C., E. W. Martin and E. A. Peck (1980), "Interior Analysis of the Observations in Multiple Linear Regression," Journal of Quality Technology, Vol. 12, No. 3, pp. 163-172.
  24. Askin, R. G. and D. C. Montgomery (1980), "Augmented Robust Estimators," Technometrics, Vol. 22, No. 3, pp. 333-341.
  25. Montgomery, D. C. and G. Weatherby (1980), "Modeling and Forecasting Time Series Using Transfer Function and Intervention Methods," AIIE Transactions, Vol. 12, No. 4, pp. 289-307.
  26. Montgomery, D. C. and R. G. Askin (1981), "Problems of Nonnormality and Multicollinearity for Forecasting Methods Based on Least Squares," AIIE Transactions, Vol. 13, No. 2, pp. 102-15.
  27. Saniga, E. W. and D. C. Montgomery (1981), "Economical Quality Control Policies for a Single-Cause System," AIIE Transactions, Vol. 13, No. 3, pp. 258-264.
  28. 28. Montgomery, D. C. (1982), "Economic Design of an Control Chart," Journal of Quality Technology, Vol. 14, No. 2, 99. 40-43.
  29. Montgomery, D. C. and L. Greene (1983), "Validation of Computer Simulation Models of Missile Systems," Journal of Spacecraft and Rockets, Vol. 20, No. 3, pp. 272-278.
  30. Askin, R. G. and D. C. Montgomery (1984), "An Analysis of Constrained Robust Regression Estimators," Naval Research Logistics Quarterly, Vol. 31, No. 2, pp. 283-296.
  31. Friedman, D. J. and D. C. Montgomery (1985), "Evaluation of the Predictive Performance of Biased Regression Estimators," Journal of Forecasting, Vol. 4, No. 2, pp. 153-163.
  32. Montgomery, D. C. (1985), "The Effect of Non-normality on Variables Sampling Plans," Naval Research Logistics Quarterly, Vol. 32, No. 1, pp. 34-41.
  33. Montgomery, D. C., Panagos, M., and R. G. Heikes (1985), "Economic Design of Control Charts for Two Manufacturing Process Models," Naval Research Logistics Quarterly, Vol. 32. No. 4, pp. 631-647.
  34. Montgomery, D. C. and R. H. Storer (1986), "Economic Models and Process Quality Control," Quality and Reliability Engineering International, Vol. 2, No. 4, pp. 221-228.
  35. Gardiner, J. S. and D. C. Montgomery (1987), "Using Statistical Control Charts for Software Quality Control," Quality and Reliability Engineering International, Vol. 3, No. 1, pp. 15-20.
  36. Gardiner, J. S., Friedman, D. J. and D. C. Montgomery (1987), "A Note on the Average Run Length of Cumulative Sum Control Charts for Count Data," Quality and Reliability Engineering International, Vol. 3, No.1, pp. 53-55.
  37. Montgomery, D. C. (1988), "Experimental Design for Product and Process Optimization," SAE Transactions, Fall Volume, pp. 145-155.
  38. Yourstone, S. A. and D. C. Montgomery (1989), "A Time-Series Approach to Discrete Real-Time Process Quality Control," Quality and Reliability Engineering International, Vol. 5, No. 4, pp. 309-317.
  39. Montgomery, D. C. (1990-91), "Using Fractional Factorial Designs for Robust Process Development," Quality Engineering, Vol. 3, No. 2, pp. 193-205.
  40. Yourstone, S. A. and D. C. Montgomery (1991), "Detection of Process Upsets - Sample Autocorrelation Control Chart and Group Autocorrelation Control Chart Applications," Quality and Reliability Engineering International, Vol. 7, pp. 133-140.
  41. Montgomery, D. C. and C. M. Mastrangelo (1991), "Some Statistical Process Control Methods for Autocorrelated Data," (with discussion), Journal of Quality Technology, Vol. 23, No. 3, pp. 179-193.
  42. Chua, M. K. and D. C. Montgomery (1991), "A Multivariate Quality Control Scheme," International Journal of Quality and Reliability Management, Vol. 8, No. 6, pp. 29-46.
  43. Hubele, N. F., D. C. Montgomery and W. H. Chin (1991-1992), "An Application of Statistical Process Control in Jet-Turbine Engine Component Manufacturing," Quality Engineering, Vol. 4, No. 2, pp. 197-210.
  44. Chua, M. K. and D. C. Montgomery (1992), "Investigation and Characterization of a Control Scheme for Multivariate Quality Control," Quality and Reliability Engineering International, Vol. 8, no. 1, pp. 37-44.
  45. Montgomery, D. C. (1992), "The Use of Statistical Process Control and Design of Experiments in Product and Process Development," IIE Transactions, Vol. 24, No. 5, pp. 4-17.
  46. Coleman, D. E. and D. C. Montgomery (1993), "A Systematic Approach to Planning for a Designed Industrial Experiment," (with discussion), Technometrics, Vol. 35, No. 1, pp. 1-27.
  47. Montgomery, D. C. and D. J. Friedman (1993), "Prediction Using Regression Models with Multicollinear Predictor Variables," IIE Transactions, Vol. 25, No. 3, pp. 73-84.
  48. Runger, G. C. and D. C. Montgomery (1993), "Adaptive Sampling Enhancements for Shewhart Control Charts," IIE Transactions, Vol. 25, No. 3, pp. 41-51.
  49. Montgomery, D. C. and G. C. Runger (1993), "Gage Capability and Designed Experiments, Part I: Basic Methods," Quality Engineering, Vol. 6, No. 1, pp. 115-135.
  50. Montgomery, D. C. and G. C. Runger (1993), "Gage Capability and Designed Experiments, Part II: Experimental Design Models and Variance Component Estimation," Quality Engineering, Vol. 6, No. 2, pp. 289-305.
  51. Del Castillo, E. and D. C. Montgomery (1993), "A Nonlinear Programming Solution to the Dual Response Problem," Journal of Quality Technology, Vol. 25, No. 3, pp. 199-204.
  52. Del Castillo, E. and D. C. Montgomery (1993), "Optimal Design of Control Charts for Finite - Length Production Runs," Economic Quality Control, Vol. 8, No. 4, pp. 225-240.
  53. Montgomery, D. C. and S. R. Voth (1994), "Multicollinearity and Leverage in Mixture Experiments," Journal of Quality Technology, Vol. 26, No. 2, pp. 96-108.
  54. Montgomery, D. C., J. B. Keats, G. C. Runger, and W. S. Messina (1994), "Integrating Statistical Process Control and Engineering Process Control," Journal of Quality Technology, Vol. 26, No. 2, pp. 79-87.
  55. Del Castillo, E. and D. C. Montgomery (1994), "Short-Run Statistical Process Control: Q-Chart Enhancements and Alternatives," Quality and Reliability Engineering International, Vol. 10, No. 2, pp. 87-97.
  56. Prabhu, S. S., D. C. Montgomery, and G. C. Runger (1994), "A Combined Adaptive Sample Size and Adaptive Sampling Interval Control Scheme," Journal of Quality Technology, Vol. 26, No. 3, pp. 164-176.
  57. Torng, James C., D. C. Montgomery and J. K. Cochran (1994), "Economic Design of the EWMA Control Chart," Economic Quality Control, Vol. 9, No. 1, pp. 3-23.
  58. Heinsman, J. A. and D. C. Montgomery (1995), "Optimization of a Household Product Formulation Using a Mixture Experiment," Quality Engineering, Vol. 7, No. 3, pp. 583-600.
  59. Prabhu, S. S., D. C. Montgomery, and G. C. Runger (1995), "A Design Tool to Evaluate Average Time to Signal Properties of Adaptive Control X-Bar Charts," Journal of Quality Technology, Vol. 27, No. 1, pp. 74-83.
  60. Del Castillo, E. and D. C. Montgomery (1995), "A Kalman Filtering Process Control Scheme with an Application to Semiconductor Short-Run Manufacturing," Quality and Reliability Engineering International, Vol. 11, No. 2.
  61. Mastrangelo, C. M. and D. C. Montgomery (1995), "SPC with Correlated Observations for the Chemical and Process Industries," Quality and Reliability Engineering International, Vol. 11, No. 2, pp. 79-89.
  62. Montgomery, D. C., J. C-C. Torng, J. K. Cochran, and F. P. Lawrence (1995), "Statistically Constrained Economic Design of the EWMA Control Chart," Journal of Quality Technology, Vol. 27, No. 3, pp. 250-256.
  63. Torng, J. C-C., J. K. Cochran, D. C. Montgomery, and F. P. Lawrence (1995), "Implementing Statistically Constrained Economic EWMA Control Charts," Journal of Quality Technology, Vol. 27, No. 3, pp. 257-264.
  64. Annadi, H.P., J. B. Keats, G. C. Runger, and D. C. Montgomery (1995), "An Adaptive Sample Size CUSUM Control Chart," International Journal of Production Research, Vol. 33, No. 6, pp. 1605-1616.
  65. Grayson, J. M., G. C. Runger, and D. C. Montgomery (1995-96), "Average Run Length Performance of the U-Chart with Control Limits Based on the Average Sample Size," Quality Engineering, Vol. 8, No. 1, pp. 117-128.
  66. Lowry, C. A., and D. C. Montgomery (1995), "A Review of Multivariate Control Charts," IIE Transactions, Vol. 27, No. 6, pp. 800-810.
  67. Del Castillo, E. and D. C. Montgomery (1996), "A General Model for the Optimal Economic Design of Charts Used to Control Short or Long Run Processes," IIE Transactions, Vol. 28, No. 3, pp. 193-201.
  68. Del Castillo, E., P. Mackin, and D. C. Montgomery (1996), "Multiple Criteria Optimal Design of Control Charts," IIE Transactions, Vol. 28, No. 6, pp. 467-474.
  69. Scranton, R., G. C. Runger, J. B. Keats and D. C. Montgomery (1996), "Efficient Shift Detection Using Multivariate EWMA Control Charts and Principal Components," Quality and Reliability Engineering International, Vol. 12, No. 3, pp.165-172.
  70. Cornell, J. A. and D. C. Montgomery (1996), "Fitting Models to Data: Interaction Versus Polynomial? Your Choice!", Communications in Statistics-Theory and Methods, Vol. 25, No. 11, pp. 2531-2555.
  71. Del Castillo, E., Montgomery, D. C., and D. R. McCarville (1996), "Modified Desirability Functions for Multiple Response Optimization," Journal of Quality Technology, Vol. 28, No. 3, pp. 337-345.
  72. Cornell, J. A. and D. C. Montgomery (1996), "Interaction Models as Alternatives to Low-Order Polynomials," Journal of Quality Technology, Vol. 28, No. 2, pp.163-176.
  73. Mastrangelo, C. M., Runger, G. C. and D. C. Montgomery (1996) "Statistical Process Monitoring with Principal Components," Quality and Reliability Engineering International, Vol. 12, No. 3, pp. 203-210.
  74. Shumate, D. A. and D. C. Montgomery (1996), "Development of a TiW Plasma Etch Process Using a Mixture Experiment and Response Surface Methodology," IEEE Transactions on Semiconductor Manufacturing, Vol. 9, No. 3, pp. 335-343.
  75. Runger, G. C., Alt, F. A., and D. C. Montgomery (1996), "Contributors to a Multivariate Statistical Process Control Signal", Communications in Statistics - Theory and Methods, Vol. 25, No. 10, pp. 2203-2213.
  76. Montgomery, D. C. and G. C. Runger (1996), "Foldovers of 2k-p Resolution IV Designs," Journal of Quality Technology, Vol. 28, No. 4, pp. 446-450.
  77. Keats, J.B., Montgomery, D.C., Runger, G.C., and W.S. Messina (1996), "Feedback Control and Statistical Process Monitoring", International Journal of Reliability, Quality and Safety Engineering, Vol. 3, No. 3, pp. 231-241.
  78. Runger, G. C., Alt, F. B., and D. C. Montgomery (1996), "Controlling Multiple Stream Processes with Principal Components," International Journal of Production Research, Vol. 34, No. 11, pp. 2991-2999.
  79. Del Castillo, E., Grayson, J. M., Montgomery, D. C., and G. C. Runger (1996), "A Review of Statistical Process Control Techniques for Short-Run Manufacturing Systems," Communications in Statistics-Theory and Methods, Vol. 25, No. 11, pp. 305-316.
  80. Rhoads, T. R., D. C. Montgomery, and C. M. Mastrangelo (1996), "A Fast Initial Response Scheme for the Exponentially Weighted Moving Average Control Chart," Quality Engineering, Vol. 9, No. 2, pp. 317-327.
  81. Somerville, S. E. and D. C. Montgomery (1996), "Process Capability Indices and Nonnormal Distributions," Quality Engineering, Vol. 9, No. 2, pp. 305-316.
  82. McCarville, D. R., and D. C. Montgomery (1996), "Optimal Guard Bands for Gauges in Series," Quality Engineering, Vol. 9, No. 2, pp. 167-177.
  83. Kennedy, D. J., Montgomery, D. C., and Quay, B. H. (1996), "Stochastic Environmental Life Cycle Assessment Modeling", International Journal of Life Cycle Assessment, Vol. 1, No. 4, pp. 199-207.
  84. Simpson, J.R., and Montgomery, D. C. (1996), "A Biased-Robust Regression Technique for the Combined Outlier-Multicollinearity Problem", Journal of Statistical Computation and Simulation, Vol. 56, pp. 1-22.
  85. Montgomery, D. C., and Woodall, W. H. (1997) (editors), "A Discussion on Statistically-Based Process Monitoring and Control", Journal of Quality Technology, Vol. 29, No. 2, pp. 121-162.
  86. Lawson, C., Keats, J. B., and Montgomery, D. C. (1997), "Comparison of Robust and Least Squares Regression in Computer-Generated Probability Plots", IEEE Transactions on Reliability, Vol. 46, No. 1, pp. 108-115.
  87. 87. Prabhu, S. S., Montgomery, D. C., and G. C. Runger (1997), "Economic-Statistical Design of an Adaptive Control Chart", International Journal of Production Economics, Vol. 49, pp. 1-15.
  88. Montgomery, D. C., Keats, J. B., Fowler, J. W., Runger, G. C., and Rajavelu, G. (1997), "Statistical Monitoring Techniques for Contamination Data", Journal of the Institute of Environmental Sciences, Vol. XL, No. 2, pp. 23-30.
  89. Schaub, D. A., and Montgomery, D. C. (1997), "Using Experimental Design to Optimize the Stereolithography Process", Quality Engineering, Vol. 9, No. 4, pp. 575-585.
  90. Prabhu, S. S., Runger, G. C., and D. C. Montgomery (1997), "Selection of the Subgroup Size and Sampling Interval for a CUSUM Control Chart", IIE Transactions, Vol. 29, No. 6, pp. 451-457.
  91. Runger, G.C., and Montgomery, D.C. (1997), "Multivariate and Univariate Process Control: Geometry and Shift Directions", Quality and Reliability Engineering International, Vol. 13, No. 3, pp. 153-158.
  92. Myers, R. H., and Montgomery, D. C. (1997), "A Tutorial on Generalized Linear Models", Journal of Quality Technology, Vol. 29, No. 3, pp. 274-291.
  93. Schaub, D.A., Chu, K.-R., and Montgomery, D.C.(1997), "Optimizing Stereolithography Throughput", Journal of Manufacturing Systems, Vol. 16, No. 4, pp. 290-303.
  94. Andere-Rendon, J., Montgomery, D. C., and Rollier, D. A. (1997), "Design of Mixture Experiments Using Bayesian D-Optimality", Journal of Quality Technology, Vol. 29, No. 4, pp. 451-463.
  95. Montgomery, D. C., Borror, C. M., and Stanley, J. D. (1997-98), "Some Cautions in the Use of Plackett-Burman Designs", Quality Engineering, Vol. 10, No. 2, pp. 371-381.
  96. Bowles, M.L., and Montgomery, D.C. (1997-98), "How to Formulate the Ultimate Margarita: A Tutorial on Experiments with Mixtures", Quality Engineering, Vol. 10, No. 2, pp. 239-253.
  97. Kennedy, D. J., Montgomery, D. C., Rollier, D. A. and Keats, J. B. (1997), "Assessing Input Data Uncertainty in Life Cycle Assessment Inventory Models", International Journal of Life Cycle Assessment, Vol. 2, No. 4, pp. 229-239.
  98. Borror, C. M., Montgomery, D. C., and Runger, G. C. (1997), "Confidence Intervals on Variance Components from Gauge Capability Studies", Quality and Reliability Engineering International, Vol. 13, No. 6, pp. 361-369.
  99. Zimmer, L. S., Montgomery, D. C., and Runger, G.C. (1998), "Evaluation of a Three-State Adaptive Sample Size X-Bar Control Chart", International Journal of Production Research, Vol. 36, No. 3, pp. 733-743.
  100. Simpson, J.R., and Montgomery, D.C. (1998), "A Robust Regression Technique Using Compound Estimation", Naval Research Logistics, Vol. 45, No. 2, pp. 125-139.
  101. Sebert, D. M., Montgomery, D. C., and Rollier, D. A. (1998), "A Clustering Algorithm for Identifying Multiple Outliers in Linear Regression", Computational Statistics and Data Analysis, Vol. 27, pp. 461-484.
  102. Stanley, J. D., McCarville, D. R., and Montgomery, D. C. (1998), "A Time Series Approach for Compensating Errors in Complex Gauge Systems", Quality and Reliability Engineering International, Vol. 14, No. 4, pp. 273-280.
  103. Simpson, J. R. and Montgomery, D. C. (1998), "The Development and Evaluation of Alternative Generalized M-estimation Techniques," Communications in Statistics: Simulation and Computation, Vol. 27, No. 4, pp. 999-1018.
  104. Simpson, J. R. and Montgomery, D. C. (1998), "A Performance-Based Assessment of Robust Regression Methods", Communications in Statistics: Simulation and Computation, Vol. 27, No. 4, pp. 1031-1049.
  105. Montgomery, D. C. (1999), "Some Comments on Future Directions in RSM", Invited discussion of papers by G. E. P. Box and R. H. Myers, Journal of Quality Technology, Vol. 31, No. 1, pp. 45-46.
  106. Hauck, D. J., Runger, G. C., and Montgomery, D. C. (1999), "Multivariate Statistical Process Monitoring and Diagnosis with Grouped Regression-Adjusted Variables", Communications in Statistics: Simulation and Computation, Vol. 28, No. 2, pp. 309-328.
  107. Catlin, A. E., Bauer, K. W., Jr., Mykytka, E. W., and Montgomery, D. C. (1999), "System Comparison Procedures for Automatic Target Recognition Systems", Naval Research Logistics, Vol. 46, No. 4, pp. 357-371.
  108. Montgomery, D. C. (1999), "Experimental Design for Product and Process Design and Development" (with commentary), Journal of the Royal Statistical Society Series D (The Statistician), Vol. 48, Part 2, pp. 159-177.
  109. Borror, C. M., Montgomery, D. C., and Runger, G. C. (1999), "Robustness to Normality of the EWMA Control Chart", Journal of Quality Technology, Vol. 31, No. 3, pp. 309-316.
  110. Runger, G. C., Keats, J. B., Montgomery, D. C., and Scranton, R. D. (1999), "Improving the Performance of the Multivariate EWMA Control Chart", Quality and Reliability Engineering International, Vol. 15, No. 3, pp. 161-166.
  111. Silknitter, K. O., Wisnowski, J. W., and Montgomery, D. C. (1999), "The Analysis of Covariance: A Useful Technique for Analyzing Quality Improvement Experiments", Quality and Reliability Engineering International, Vol. 15, No. 4, pp. 303-316.
  112. Woodall, W.H. and Montgomery, D. C. (1999), "Research Issues and Ideas in Statistical Process Control", Journal of Quality Technology, Vol. 31, No. 4, pp. 376-386.
  113. Wisnowski, J. W., Runger, G. C., and Montgomery, D. C. (1999-2000), "Analyzing Data From Designed Experiments: A Regression Tree Approach", Quality Engineering, Vol. 12, No. 2, pp. 185-198.
  114. Lewis, S. L., Montgomery, D. C., and Myers, R. H. (1999-2000), "The Analysis of Designed Experiments with Nonnormal Responses", Quality Engineering, Vol. 12, No. 2, pp. 225-244.
  115. Montgomery, D. C., Keats, J. B., Perry, L. A., Thompson, J. R., and Messina, W. S. (2000), "Using Statistically Designed Experiments for Process Development and Improvement: An Application in Electronics Manufacturing", Robotics and Computer Integrated Manufacturing, Vol. 16, No. 1, pp. 55-63.
  116. Carlyle, W. M., Montgomery, D. C., and Runger, G. C. (2000), "Optimization Problems and Methods in Quality Control and Improvement" (with Discussion), Journal of Quality Technology, Vol. 32, No. 1, pp. 1-31.
  117. Borror, C. M. and Montgomery, D. C. (2000), "Mixed Resolution Designs as Alternatives to Taguchi Inner/Outer Array Designs for Robust Design Problems", Quality and Reliability Engineering International, Vol. 16, No. 2, pp. 117-127.
  118. Zimmer, L. S., Montgomery, D. C., and Runger, G. C. (2000), "Guidelines for the Application of Adaptive Control Charting Schemes", International Journal of Production Research, Vol. 38, No. 9, pp. 1977-1992.
  119. Heredia-Langner, A., Loredo, E. N., Montgomery, D. C., and Griffin, A. H. (2000), "Optimization of a Bonded Leads Process using Statistically Designed Experiments", Robotics and Computer Integrated Manufacturing, Vol. 16, No. 5, pp. 377-382.
  120. Nelson, B. J., Montgomery, D. C., Elias, R. J., and Maass, E. (2000), "A Comparison of Several Design Augmentation Strategies", Quality and Reliability Engineering International, Vol. 16, No. 5, pp. 435-449.
  121. O'Neill, J. C., Borror, C. M., Eastman, P. Y., Fradkin, D. G., James, M. P., Marks, A. P., and Montgomery, D. C. (2000), "Optimal Assignment of Samples to Treatments for Robust Design", Quality and Reliability Engineering International, Vol. 16, No. 5, pp. 417-421.
  122. Woodall, W. H. and Montgomery, D. C. (2000-01), "Using Ranges to Estimate Variability", Quality Engineering, Vol. 13, No. 2, pp. 211-217.
  123. Montgomery, D. C., Keats, J. B., Yatskievitch, M., and Messina, W. S. (2000), "Integrating Statistical Process Monitoring with Feedforward Control", Quality and Reliability Engineering International, Vol. 16, No. 6, pp. 515-525.
  124. Molnau, W. E., Montgomery, D. C., and Runger, G. C. (2001), "Statistically Constrained Economic Design of the Multivariate Exponentially Weighted Moving Average Control Chart", Quality and Reliability Engineering International, Vol. 17, No. 1, pp. 39-49.
  125. Montgomery, D. C. (2001), "Opportunities and Challenges for Industrial Statisticians", Journal of Applied Statistics, Vol. 28, Nos. 3&4, pp. 427-439.
  126. Wisnowski, J. W., Montgomery, D. C., and Simpson, J. R. (2001), "A Comparative Analysis of Multiple Outlier Detection Procedures in the Linear Regression Model", Computational Statistics and Data Analysis, Vol. 36, No. 3, pp 351-382.
  127. Heredia-Langner, A., Montgomery, D. C., Runger, G. C., Borror, C. M., and Post, R. I. (2001), "Performance of Customized Control Charts to Detect Process Disturbances", Quality and Reliability Engineering International, Vol. 17, No. 3, pp. 205-218.
  128. Lewis, S. L., Montgomery, D. C. and Myers, R. H. (2001), "Examples of Designed Experiments with Nonnormal Responses", Journal of Quality Technology, Vol. 33, No. 3, pp. 265-278.
  129. Lewis, S. L., Montgomery, D. C. and Myers, R. H. (2001), "Confidence Interval Coverage for Designed Experiments Analyzed with Generalized Linear Models", Journal of Quality Technology, Vol. 33, No. 3, pp. 279-292.
  130. Montgomery, D. C. and Borror, C. M. (2001), Invited discussion of "Factor Screening and Response Surface Exploration", by S.-W. Cheng and C. F. J. Wu, Statistica Sinica, Vol. 11, No. 3, pp. 591-595.
  131. Montgomery, D. C., Lawson, C., Molnau, W. E., and Elias, R. (2001), Invited discussion of "Six Sigma Black Belts: What Do They Need to Know?", by R. W. Hoerl, Journal of Quality Technology, Vol. 33, No. 4, pp. 407-409.
  132. Molnau, W. E., Runger, G. C., Montgomery, D. C., Skinner, K. R., Loredo, E. N., and Prabhu, S. S. (2001), "A Program for ARL Calculation for Multivariate EWMA Control Charts", Journal of Quality Technology, Vol. 33, No. 4, pp. 515-521.
  133. Houston, D. X., Ferreira, S., Collofello, J. S., Montgomery, D. C., Mackulak, G. T., and Shunk, D. L (2001), "Behavorial Characterization: Finding and Using the Influential Factors in Software Process Simulation Models", Journal of Systems and Software, Vol. 59, pp. 259-270.
  134. Perry, L. A., Montgomery, D. C., and Fowler, J. W. (2001), "Partition Experimental Designs for Sequential Processes: Part I - First-Order Models", Quality and Reliability Engineering International, Vol. 17, No. 6, pp. 429-438.
  135. Montgomery, D. C. (2001), "The Future of Industrial Statistics", Orion, Vol. 16, No. 1, pp. 1-21.
  136. Canter, K. G., Kennedy, D. J., Keats, J. B., Montgomery, D. C., and Carlyle, W. M. (2002), "Screening Stochastic Environmental Life Cycle Assessment Inventory Models", International Journal of Life Cycle Assessment, Vol. 7, No. 1, pp. 18-26.
  137. Borror, C. M., Montgomery, D. C., and Myers, R. H. (2002), "Evaluation of Statistical Designs for Experiments Involving Noise Variables", Journal of Quality Technology, Vol. 34, No. 1, pp. 54-70.
  138. Fowler, J. W., Phojanamongkolkij, N., Cochran, J. K., and Montgomery, D. C. (2002), "Optimal Batching in a Wafer Fabrication Facility Using a Multi-product G/G/c Model with Batch Processing", International Journal of Production Research, Vol. 40, No. 2, pp. 275-292.
  139. Borror, C. M., Heredia-Langner, A., and Montgomery, D. C. (2002), "Generalized Linear Models in the Analysis of Industrial Experiments", Journal of Propagations in Probability and Statistics (International Edition), Vol. 2, No. 2, pp. 127-144.
  140. Wisnowski, J. W., Simpson, J. R., and Montgomery, D. C. (2002), "A Performance Study for Multivariate Location and Shape Estimators", Quality and Reliability Engineering International, Vol. 18, No. 2, pp. 117-129.
  141. Heredia-Langner, A., Montgomery, D. C., and Carlyle, W. M. (2002), "Solving a Multistage Partial Inspection Problem using Genetic Algorithms", International Journal of Production Research, Vol. 40, No. 8, pp. 1923-1940.
  142. Montgomery, D. C., Loredo, E. N., Jearkpaporn, D., and Testik, M. C. (2002),"Experimental Designs for Constrained Regions", Quality Engineering, Vol. 14, No. 4, pp. 587-601.
  143. Wisnowski, J. W., Simpson, J. R., and Montgomery, D. C. (2002) "An Improved Compound Estimator for Robust Regression," Communications in Statistics: Simulation and Computation, Vol. 31, No. 4, pp. 653-772.
  144. Somerville, S. E., Montgomery, D. C., and Runger, G. C. (2002), "Filtering and Smoothing Methods for Mixed Particle Count Distributions", International Journal of Production Research, Vol. 40, No. 13, pp. 2991-3013.
  145. Perry, L. A., Montgomery, D. C., and Fowler, J. W. (2002), "Partition Experimental Designs for Sequential Processes: Part II - Second-Order Models", Quality and Reliability Engineering International, Vol. 18, No. 5, pp. 373-382.
  146. Skinner, K. R., Montgomery, D. C., Runger, G. C., Fowler, J. W., McCarville, D. R., Rhoads, T. R., and Stanley, J. D. (2002), "Multivariate Statistical Methods for Modeling and Analysis of Wafer Probe Test Data", IEEE Transactions on Semiconductor Manufacturing, Vol. 15, No. 4, pp. 523-530.
  147. Lanning, J. W., Montgomery, D. C., and Runger, G. C. (2002-03), "Monitoring a Multiple Stream Filling Operation Using Fractional Samples", Quality Engineering, Vol. 15, No. 2, pp. 183-195.
  148. Heredia-Langner, A., Carlyle, W. M., Montgomery, D. C., Borror, C. M., and. Runger, G. C. (2003), "Genetic Algorithms for the Construction of D-Optimal Designs", Journal of Quality Technology, Vol. 35, No. 1, pp. 28-46.
  149. Holcomb, D. R., Montgomery, D. C., and Carlyle, W. M. (2003), "Analysis of Supersaturated Designs", Journal of Quality Technology, Vol. 35, No. 1, pp. 13-27.
  150. Skinner, K. R., Montgomery, D. C., and Runger, G. C. (2003), "Process Monitoring for Multiple Count Data Using Generalized Linear Model Based Control Charts", International Journal of Production Research, Vol. 41, No. 6, pp. 1167-1180.
  151. Wisnowski, J.W., Simpson, J.R., Montgomery, D.C., and Runger, G. C. (2003). "Resampling Methods for Variable Selection in Robust Regression," Computational Statistics and Data Analysis, Vol. 43, No. 3, pp. 341-355.
  152. Borror, C. M., Keats, J. B., and Montgomery, D. C. (2003), "Robustness of the Time Between Events CUSUM", International Journal of Production Research, Vol. 41, No. a5, pp. 3435-3444.
  153. Goldfarb, H. B., Borror, C. M., and Montgomery, D. C. (2003), "Mixture-Process Variable Experiments with Noise Variables", Journal of Quality Technology, Vol. 35, No. 4, pp. 393-405.
  154. Burdick, R. K., Borror, C. M., and Montgomery, D. C. (2003), "A Review of Methods for Measurement Systems Capability Analysis", Journal of Quality Technology, Vol. 35, No. 4, pp. 342-354.
  155. Jearkpaporn, D., Montgomery, D. C., Runger, G. C., and Borror, C. M. (2003), "Process Monitoring for Correlated Gamma Distributed Data Using Generalized Linear Model Based Control Charts", Quality and Reliability Engineering International Vol. 19, No. 6, pp. 477-491.
  156. Goldfarb, H. B., Borror, C. M., Montgomery, D. C., and Anderson-Cook, C. M. (2004), "Three-Dimensional Variance Dispersion Graphs for Mixture-Process Experiments", Journal of Quality Technology, Vol. 36, No. 1, pp. 109-124.
  157. Myers, R. H., Montgomery, D. C., Vining, G. G., Borror, C. M., and Kowalski, S. M. (2004), "Response Surface Methodology: A Retrospective and Literature Survey", Journal of Quality Technology, Vol. 36, No. 1, pp. 53-77.
  158. Shah, H. K., Montgomery, D. C., and Carlyle, W. M. (2004), "Response Surface Modeling and Optimization in Multiresponse Experiments using Seemingly Unrelated Regressions", Quality Engineering, Vol. 16, No. 3, pp. 387-397.
  159. Goldfarb, H. B., Anderson-Cook, C. M., Borror, C. M., and Montgomery, D. C. (2004), "Fraction of Design Space Plots to Assess the Prediction Capability of Mixture and Mixture-Process Designs", Journal of Quality Technology Vol. 36, No. 2, pp. 169-179.
  160. Robinson, T. J., Myers, R. H., and Montgomery, D. C. (2004), "Analysis Considerations in Industrial Split-Plot Experiments with Non-Normal Responses", Journal of Quality Technology, Vol. 36, No. 2, pp. 180-192.
  161. Goldfarb, H. B., Borror, C. M., Montgomery, D. C., and Anderson-Cook, C. M. (2004), "Evaluating Mixture-Process Designs with Control and Noise Variables", Journal of Quality Technology, Vol. 36, No. 3, pp. 245-262.
  162. Heredia-Langner, A., Montgomery, D. C., Carlyle, W. M., and Borror, C. M. (2004), "Model-Robust Optimal Designs: A Genetic Algorithm Approach", Journal of Quality Technology, Vol. 36, No. 3, pp. 263-279.
  163. Woodall, W. H., Spitzner, D. J., Montgomery, D. C., and Gupta, S. (2004), "Using Control Charts to Monitor Process and Product Profiles", Journal of Quality Technology, Vol. 36, No. 3, pp. 309-320.
  164. Schaefer, L. A., Montgomery, D. C., and Wolfe, P. M. (2004), "A Flow Metamodel for Delivery Agents Over a Spatial Area", IIE Transactions, Vol. 36, pp. 1055-1065.
  165. Drain, D., Carlyle, W. M., Montgomery, D. C., Borror, C. M., and Anderson-Cook, C. M. (2004), "A Genetic Algorithm Hybrid for Constructing Optimal Response Surface Designs", Quality and Reliability Engineering International, Vol. 20, pp. 637-650.
  166. Anderson-Cook, C. M., Goldfarb, H. B., Borror, C. M., Montgomery, D. C., Canter, K. K., and Twist, J. N. (2004), "Mixture and Mixture-Process Variable Experiments for Pharmaceutical Applications", Pharmaceutical Statistics, Vol. 3, pp. 247-260.
  167. Skinner, K. M., Montgomery, D. C., and Runger, G. C. (2004), "Generalized Linear Model-Based Control Charts for Discrete Semiconductor Data", Quality and Reliability Engineering International, Vol. 20, pp. 777-786.
  168. Goldfarb, H. B., Borror, C. M., Montgomery, D. C., and Anderson-Cook, C. M. (2005), "Using Genetic Algorithms to Generate Mixture-Process Experimental Designs Involving Control and Noise Variables", Journal of Quality Technology, Vol. 37, No. 1, pp. 60-74.
  169. Kowalski, S. M., Borror, C. M., and Montgomery, D. C. (2005), "A Modified Path of Steepest Ascent for Split-Plot Experiments", Journal of Quality Technology, Vol. 37, No. 1, pp. 75-83.
  170. Suryanarayanan, S., Montgomery, D. C., and Heydt, G. T. (2005), "Considerations for Implementing Tag Schedules in Transmission Circuits", IEEE Transactions on Power Systems, Vol. 20, No. 1, pp. 523-524.
  171. Montgomery, D. C., Myers, R. H., Carter, W. H. Jr., and Vining, G. G. (2005), "The Hierarchy Principal in Designed Industrial Experiments", Quality and Reliability Engineering International, Vol. 21, No. 2, pp. 197-201.
  172. Jearkpaporn, D., Montgomery, D. C., Runger, G. C., and Borror, C. M. (2005), "Model-Based Process Monitoring using Robust Generalized Linear Models", International Journal of Production Research, Vol. 43, No. 7, pp. 1337-1354.
  173. Vining, G. G., Kowalski, S. M., and Montgomery, D. C. (2005), "Response Surface Designs Within a Split-Plot Structure", Journal of Quality Technology, Vol. 37, No. 2, pp. 115-129.
  174. Montgomery, D.C., Burdick, R.K., Lawson, C.A., Molnau, W.E., Zenzen, F., Jennings, C.L., Shah, H.K., Sebert, D.M., Bowser, M.D., and Holcomb, D.R. (2005), "A University-Based Six-Sigma Program", Quality and Reliability Engineering International, Vol. 21, No. 3, pp. 243-248.
  175. Mason, S.J., Fowler, J.W., Carlyle, W.M., and Montgomery, D.C. (2005), "Heuristics for Minimizing Total Weighted Tardiness in Complex Job Shops", International Journal of Production Research, Vol. 43, No. 10, pp. 1943-1963.
  176. Ozol-Godfrey, A., Anderson-Cook, C. M., and Montgomery, D. C. (2005), "Fraction of Design Space Plots for Examining Model Robustness", Journal of Quality Technology, Vol. 37, No. 3, pp. 223-235.
  177. Park, Y.-J., Richardson, D. E., Montgomery, D. C., Ozol-Godfrey, A., Borror. C. M., and Anderson-Cook, C. M. (2005), Prediction Variance Properties of Second-Order Designs for Cuboidal Regions", Journal of Quality Technology, Vol. 37, No. 4, pp. 253-266.
  178. Houston, D., Ferreira, S., and Montgomery, D. C. (2005), "Using Unreplicated 2k-p Designs for Characterizing Moderately Dimensioned Deterministic Computer Models", Quality and Reliability Engineering International, Vol. 21, No. 8, pp. 809-824.
  179. Robinson, T. J., Wulff, S. S., Montgomery, D. C., and Khuri, A. I. (2006), "Robust Parameter Design using Generalized Linear Models", Journal of Quality Technology, Vol. 38, No. 1, pp. 65-75.
  180. Park, Y.-J., Montgomery, D.C., Fowler, J. W., and Borror, C.M. (2006), "Cost-constrained G-efficient Response Surface Designs for Cuboidal Regions", Quality and Reliability Engineering International, Vol. 22, No. 2, pp. 121-139.
  181. Gupta, S., Montgomery, D. C., and Woodall, W. H. (2006), "Performance Evaluation of Two Methods for Online Monitoring of Linear Calibration Profiles", International Journal of Production Research, Vol. 44, No. 10, pp. 1927-1942.

Chapters in Books

  1. Johnson, L. A. and D. C. Montgomery (1978), "Production and Inventory Control," The Encyclopedia of Computer Science and Technology, Vol. 10, Marcel Dekker, New York .
  2. Johnson, L. A. and D. C. Montgomery (1979), "Forecasting with Exponential Smoothing and Related Methods," Forecasting, Vol. 12, TIMS Studies in the Management Sciences, North-Holland, Amsterdam .
  3. Montgomery, D. C. and D. J. Friedman (1989), "Statistical Process Control in a Computer-Integrated Manufacturing Environment," Statistical Process Control in Automated Manufacturing, J. B. Keats and N. F. Hubele, editors, Marcel Dekker, New York.
  4. Montgomery, D. C. and E. A. Peck (1990), "Multicollinearity in Regression," Handbook of Statistical Methods for Engineers, McGraw-Hill Book Co., H.M. Wadsworth, Jr., Editor, McGraw-Hill, New York.
  5. Montgomery, D. C. (1991), "Analyzing Location and Dispersion Effects from Designed Experiments: Same Examples," Statistical Process Control in Manufacturing, J. B. Keats and D. C. Montgomery, editors, Marcel Dekker, New York .
  6. Messina, W. S., Montgomery, D. C., Keats, J. B. and G. C. Runger (1996), "Strategies for Statistical Monitoring of Integral Control for the Continuous Process Industries," in Statistical Applications in Process Control, edited by J. B. Keats and D. C. Montgomery, Marcel Dekker, New York.
  7. Montgomery, D. C. (1996), "Some Practical Guidelines for Designing an Industrial Experiment," in Statistical Applications in Process Control, edited by J. B. Keats and D. C. Montgomery, Marcel Dekker, New York.
  8. Montgomery, D. C. and G. C. Runger (1996), "Experimental Design Models with Random Components," in Statistical Applications in Process Control, edited by J. B. Keats and D. C. Montgomery, Marcel Dekker, New York.
  9. McCarville, D. R. and D. C. Montgomery (1996), "Optimizing Defect Levels and Losses from Gage Errors," in Statistical Applications in Process Control, edited by J. B. Keats and D. C. Montgomery, Marcel Dekker, New York.
  10. Mastrangelo, C. M. and D. C. Montgomery (1996), "Time Series Analysis," Encyclopedia of Operations Research and Management Science, Kluwer Academic Publishers, Norwell , MA .
  11. Montgomery, D. C., Peck, E.A., and Simpson, J.R.(1998), "Multicollinearity and Biased Estimation in Regression", in Handbook of Statistical Methods for Engineers and Physical Scientists, 2nd edition, edited by H.M. Wadsworth, Jr., McGraw-Hill, pp. 16.1-16.27.
  12. Mastrangelo, C. M. and Montgomery, D. C. (1999), "Process Monitoring with Autocorrelated Data", in Statistical Process Monitoring and Optimization, edited by G. G. Vining and Sung H. Park, pp. 139-160, Marcel Dekker, Inc., New York.
  13. Montgomery, D. C. and Jennings, C. L. (2003), "Statistische Methoden in der Prozesskontrolle", in Wahrscheinlichkeitstheorie, Stochastische Prozesse, Mathematische Statistik, F.E. Beichelt and D. C. Montgomery, Editors, B. G. Teubner Verlag, Weisbaden.
  14. Montgomery , D. C. and Jennings , C. L. (2006), "An Overview of Industrial Screening Experiments", Chapter 1 in Screening: Methods for Experimentation in Industry, Drug Discovery, and Genetics, Angela Dean and Susan Lewis, Editors, Springer, NY, pp. 1-20.
  15. Goldfarb, H. B. and Montgomery, D. C. (2006), "Graphical Methods for Comparing Response Surface Designs for Experiments with Mixture Components", Chapter 14 in Response Surface Methodology and Related Topics, edited by André I Khuri, World Scientific Publishing Co., Singapore.

Papers in Conference Proceedings

  1. Montgomery, D. C. (1971), "Stochastic Capacity Decision Models for Production Facilities," Proceedings of the AIIE Annual Conference, Boston , MA .
  2. Ghare, P. M. and D. C. Montgomery (1970), "Flow Management in Transportation Networks," Proceedings of the Fifth International Conference on Operations Research, Venice, Italy, June 1969, Tavistock Publishers, Ltd..
  3. Montgomery, D. C. and H. M. Wadsworth (1972), "Some Techniques for Multivariate Quality Control Applications," Transactions of the ASQC, Washington , D.C.
  4. Marsh, J. D. and D. C. Montgomery (1973), "Optimal Procedures for Scheduling Jobs with Sequence Dependent Changeover Times on Parallel Processors," Proceedings of the AIIE Annual Conference, Chicago , IL .
  5. Johnson, L. A. and D. C. Montgomery (1974), "On Dynamic Production Planning Models," Proceedings of the Southeast IDS Meeting, New Orleans , LA.
  6. Montgomery, D. C., J. F. Mance and R. G. Heikes (1974), "An Economic Model of the Fraction Defective Control Chart with Multiple Assignable Causes," Transactions of the ASQC, Boston , MA.
  7. Brown, E. L. and D. C. Montgomery (1975), "An Application of Network Simulation to Operational Testing and Evaluation," Proceedings of the 14th Annual U. S. Army Operations Research Symposium, Ft. Lee , VA. , November.
  8. Friese, W. F., Jr., and D. C. Montgomery (1977), "A Cost-Optimal Approach to Selecting a Fractional Factorial Design," Proceedings of the 16th Annual U.S. Army Operations Research Symposium, Ft. Lee, VA.
  9. Russ, S. W., Jr., D. C. Montgomery, and H. M. Wadsworth, Jr., (1977) "A Cost Optimal Approach to Selection of Experimental Designs for Operational Testing Under Conditions of Constrained Sample Size," Proceedings of the 16th Annual U.S. Army Operations Research Symposium, Ft. Lee , VA.
  10. Simms, E. D. and D. C. Montgomery (1977), "The Use of Discriminant Analysis for Risk Assessment in Operational Testing," Proceedings of the 16th Annual U.S. Army Operations Research Symposium, Ft. Lee , VA.
  11. Montgomery, D. C. and G. Weatherby (1979), "Factor Screening Methods in Computer Simulation," Proceedings of the Winter Simulation Conference, San Diego , CA .
  12. Montgomery, D. C. and E. A. Peck (1980), "The Multicollinearity Problem in Regression," Proceedings of the Southeast Decision Sciences Conference, Orlando , FL.
  13. Montgomery, D. C. (1981), "Cost Based Acceptance Sampling Plans and Process Control Schemes," Proceedings of the AIIE Fall Conference, Washington , D. C.
  14. Montgomery, D. C., Heikes, R. G., and M. R. Scheffler (1981), "Probability Models for the Occurrence of Defects," Frontiers in Statistical Quality Control, H. J. Lenz, G. B. Wetherill and P.Th. Wilrich, Editors, Physica-Verlag, Vienna.
  15. Montgomery, D. C. (1983), "Statistical Consulting: Some Comments on Training of Statisticians," Proceedings of the SAS Users Group International, New Orleans , LA.
  16. Montgomery, D. C. (1984), "Biased Estimation and Robust Regression," Proceedings of the American Association of Physicists in Medicine Midyear Topical Symposium, Mobile , AL .
  17. Montgomery, D. C., Gardiner, J. S., and B. A. Pizzano (1987), "Statistical Process Control Methods for Detecting Small Process Shifts," Frontiers in Statistical Quality Control, H. J. Lenz et al., editors, Physica-Verlag, Heidelberg.
  18. Montgomery, D. C. (1989), "Rational Subgroups and Control Charts," Proceedings of the Arizona State University Conference on Statistical Control and Design, Tempe, AZ.
  19. Montgomery, D. C. (1991), "Experimental Design in Engineering Design and Development," Proceedings of the SAS Users Group International, New Orleans, LA.
  20. Montgomery, D. C. and C. M. Mastrangelo (1991), "Basic Properties of the EWMA," Proceedings of the Arizona State University Conference on Statistical Control and Design, Tempe, AZ.
  21. Montgomery, D. C. (1992), "Some Problems in Computer-aided Design of Experiments," Proceedings of the SAS Users Group International, Honolulu, HI.
  22. Lowry, C. A. and D. C. Montgomery (1992), "Multivariate Quality Control: Review and Enhancement," Proceedings of the Institute for Decision Sciences Conference, San Francisco, CA..
  23. Montgomery, D. C., C. M. Mastrangelo, and C. A. Lowry (1993), "Statistical Process Monitoring for Dynamic Systems," Proceedings of the Industrial Engineering Research Conference, San Francisco, CA.
  24. Montgomery, D. C., and J. E. Taggart (1993), "Selection of a Second Order Response Surface Design," Proceedings of the SAS Users Group International, New York, NY.
  25. Mastrangelo, C. M., and D. C. Montgomery (1994), "Shift Detection Properties of Moving-Centerline EWMA Control Schemes", Proceedings of the Industrial Engineering Research Conference, Atlanta, GA.
  26. Montgomery, D. C. (1994), "Strategies for Integrating Statistical Process Control and Engineering Process Control", Proceedings of the Rutgers Conference on Computer Integrated Manufacturing in the Process Industries, Piscataway, NJ.
  27. Myers, R. H. and D. C. Montgomery (1994), "Robust Design and Response Surface Methodology," Proceedings of the 50th Conference on Applied Statistics, Atlantic City, NJ.
  28. Montgomery, D. C. and M. L. Bowles (1995), "Multiple Response Optimization Methods," Proceedings of the Annual Conference on Applied Statistics, Atlantic City, NJ.
  29. Montgomery, D. C., Keats, J. B., and G. Rajavelu (1996), "Statistical Monitoring Techniques for Contamination Data," Institute of Environmental Sciences-Proceedings, Orlando, Fl.
  30. Rhoads, T. R. and D. C. Montgomery (1996), "Process Monitoring with Principal Components and Partial Least Squares," Proceedings of the Industrial Engineering Research Conference, Minneapolis, MN.
  31. Montgomery, D. C., Borror, C. M., and Lewis, S. L. (1997), "Analysis of Designed Experiments using SAS PROC GENMOD", Proceedings of the Western Users of SAS Software, Universal City, CA, 22-24 October.
  32. Hoskins, D.S., Colbourn, C.J., and Montgomery, D.C. (2005), "Software Performance Testing using Covering Arrays, Efficient Screening Designs with Categorical Factors", Proceedings of the 5th International Workshop on Software Performance, WOPS 05, pp. 131-136.

Papers and Presentations at Meetings

  1. Montgomery, D. C. (1970), "Evolutionary Operation and Machine Center Capacity Control in Job-Shop Systems," contributed paper presented at the 11th American Meeting of TIMS, Los Angeles , California .
  2. Ghare, P. M. and D. C. Montgomery (1969), "Flow Management in Transportation Networks," invited paper presented at the 5th International Conference on Operations Research, Venice, Italy, also in Conference Proceedings.
  3. Fabrycky, W. J., V. Chachra and D. C. Montgomery (1970), "A Simulation Study of Three Classes of Job-Shop Sequencing Rules," invited paper presented at the 13th International Meeting of APICS, Cincinnati , Ohio .
  4. Montgomery, D. C. (1970), "Expectations of Young Engineers from Their Employers and Professional Societies," invited paper presented at the 13th International Meeting of APICS, Cincinnati , Ohio .
  5. Montgomery, D. C. (1971), "Stochastic Capacity Decision Models for Production Facilities," invited paper presented at the AIIE Annual Conference, Boston , Massachusetts , also in Conference Proceedings.
  6. Montgomery, D. C. and H. M. Wadsworth (1972), "Some Techniques for Multivariate Quality Control Applications," invited paper presented at the American Society for Quality Control Annual Conference, Washington, D.C., also in Conference Proceedings.
  7. Montgomery, D. C. and P. J. Klatt (1972), "Minimum Cost Multivariate Quality Control Tests," invited paper presented at the AIIE Annual Conference, Anaheim, California, also in Conference Proceedings and subsequently published in AIIE Transactions.
  8. Montgomery, D. C. and D. M. Evans (1972), "Second Order Response Surface Designs in Digital Simulation," invited paper presented at the 41st National ORSA Meeting, New Orleans, Louisiana, a revised version of this paper was subsequently published in Simulation.
  9. Marsh, J. D and D. C. Montgomery (1973), "Optimal Procedures for Scheduling Jobs with Sequence-Dependent Changeover Times on Parallel Processors," invited paper presented at the AIIE Annual Conference, Chicago, Illinois.
  10. Alt, F. B., J. J. Goode, D. C. Montgomery and H. M. Wadsworth (1973), "Variable Control Charts for Multivariate Data," invited paper presented at the American Statistical Association Meeting, New York .
  11. Heikes, R. G., D. C. Montgomery and J. Young (1973), "Alternate Process Models in the Economic Design of T2 Control Charts," presented at the 44th National ORSA Meeting, San Diego , California , subsequently published in AIIE Transactions.
  12. Montgomery, D. C. and C. K. Hudson (1973), "Use of Equiradial Designs in Response Surface Methodology," presented at the 44th National ORSA Meeting, San Diego , California .
  13. Johnson, L. A. and D. C. Montgomery (1974), "On Dynamic Production Planning Models," invited paper presented at the Distinguished Scholars Seminar, Southeast Institute of Decision Sciences Meeting, New Orleans, Louisiana, also in Conference Proceedings.
  14. Marsh, J. D. and D. C. Montgomery (1974), "Scheduling Jobs with Sequence Dependent Setup Times on Parallel Machines," presented at the 45th National ORSA Meeting, Boston , Massachusetts .
  15. Montgomery, D. C. (1974), "Experimental Design Techniques for Computer Simulation," invited paper at the Second Interamerican Conference on Information and Systems Engineering, Mexico City .
  16. Cummings, J. M., B. B. McCra, D. C. Montgomery and R. G. Heikes (1974), "Repairing Response Surface Designs to Minimize Bias," presented at the 46th National ORSA Meeting, San Juan , Puerto Rico .
  17. Montgomery, D. C., R. G. Heikes, and Y. G. Yap (1975), "A Comparison of Two Adaptive Forecasting Systems," presented at the 47th National ORSA Meeting, Chicago , Illinois .
  18. Gearing, D. V., R. G. Heikes and D. C. Montgomery (1975), "Development of an Economic Model of Moving Average Control Charts," presented at the Fall 1975 ORSA/TIMS National Meeting, Las Vegas .
  19. Johnson, L. A. and D. C. Montgomery (1975), "Planning Lot Size Production for Inventory," invited paper presented at the Fall ORSA/TIMS National Meeting, Las Vegas .
  20. Johnson, L. A. and D. C. Montgomery (1975), "Forecasting and Time Series Analysis," seminar presented at the 3rd Annual AIIE Fall Systems Engineering Conference, Las Vegas .
  21. Brown, E. L. and D. C. Montgomery (1975), "An Application of Network Simulation to Operational Testing and Evaluations," presented at the 14th Annual U.S. Army Operations Research Symposium, Ft. Lee , Virginia , also in Conference Proceedings.
  22. Montgomery, D. C. and V. M. Bettencourt, Jr. (1976), "A Review of Multiple Response Surface Methods in Computer Simulation," invited paper presented at the Fall ORSA/TIMS National Meeting, Miami, Florida.
  23. Johnson, L. A. and D. C. Montgomery (1977), " Forecasting with Prediction Limits," invited paper presented at the 23rd International TIMS Conference, Athens , Greece .
  24. Montgomery, D. C. (1977), "Procedures for Optimizing and Integrating Production and Distribution Operations," invited paper presented at the 6th Management Science Colloquium, Osaka University , Osaka , Japan .
  25. Friese, W. F., Jr., and D. C. Montgomery (1977), "A Cost-Optimal Approach to Selecting a Fractional Factorial Design," presented at the 16th Annual U.S. Army Operations Research Symposium, Ft. Lee , Virginia , also in Conference Proceedings.
  26. Russ, S. W., Jr., D. C. Montgomery, and H. M. Wadsworth, Jr. (1977), "A Cost Optimal Approach to Selection of Experimental Designs for Operational Testing Under Conditions of Constrained Sample Size," Presented at the 16th Annual U.S. Army Operations Research Symposium, Ft. Lee , Virginia .
  27. Simms, E. D. and D. C. Montgomery (1977), "The Use of Discriminant Analysis for Risk Assessment in Operational Testing," Presented at the 16th Annual U.S. Army Operations Research Symposium, Ft. Lee , Virginia .
  28. Johnson, L. A. and D. C. Montgomery (1979), "Forecasting Methods in Production and Operations Management," invited paper presented at the 24th International TIMS Conference, Honolulu , Hawaii .
  29. Montgomery, D. C. (1979), "Methods for Combining Forecasts," presented at the 24th International TIMS Conference, Honolulu , Hawaii .
  30. Montgomery, D. C. and G. Weatherby (1979), "Factor Screening Methods in Computer Simulation," presented at the Winter Simulation Conference, San Diego , Calif. , also in Conference Proceedings.
  31. Montgomery, D. C. and E. A. Peck (1981), "The Multicollinearity Problem in Regression," invited tutorial session at the Southeast Institute for Decision Sciences Meeting, Orlando, Florida, February 1980; also in Conference Proceedings.
  32. Montgomery, D. C. (1981), "Regression Analysis - Some Aspects of its Use in Load Research," invited paper given at the AEIC Load Research Conference, Atlanta , Georgia .
  33. Montgomery, D. C. (1981), "Cost Based Acceptance Sampling Plans and Process Control Schemes," invited paper presented at the AIIE Fall Technical Conference, Washington, D. C., also in Conference Proceedings.
  34. Montgomery, D. C. (1982), "Some Hazards of Using Regression Analysis as a Statistical Tool for Load Research," invited paper given at the AEIC Load Research Conference, Atlanta , Georgia .
  35. Montgomery, D. C. and D. J. Friedman (1982), "An Evaluation of Biased Estimators for Prediction," invited paper given at the Joint Statistical Meetings, Cincinnati , Ohio .
  36. Montgomery, D. C. (1983), "The Effect of Nonnormality on Acceptance Sampling Plans for Variables," presented at a Meeting of the National Academy of Science, Washington, D.C.
  37. Montgomery, D. C. and F. D. Baker (1983), "Statistical Modeling of Soybean Growth," Workshop on Crop Simulation, University of Illinois, Urbana-Champaign, Illinois.
  38. Montgomery, D. C. (1984), "Sampling Procedures for Monitoring Service Contracts," invited paper given at the Spring ORSA Meeting, San Francisco, Calif.
  39. Montgomery, D. C. (1984), "Improving Quality and Productivity in Manufacturing with Design of Experiments," invited presentation at the 10th Annual IBM Design of Experiments Conference, Lexington, Kentucky.
  40. Montgomery, D. C. (1984), "Design of Experiments in Development and Manufacturing Engineering," invited presentation at the 3rd Annual IBM Corporate Quality Conference, Austin, TX.
  41. Montgomery, D. C. (1984), "Economic Models and Statistical Process Control," invited presentation at the Joint Statistical Meetings, Philadelphia, PA.
  42. Montgomery, D. C. and C. M. Mastrangelo (1990), "Statistical Process Control Methods for Autocorrelated Data." Invited paper, JQT Session, ASQC/ASA Fall Technical Conference, Richmond, VA.
  43. Montgomery, D. C. and S. R. Voth (1991), "Some Practical Aspects of Designing Mixture Experiments." Invited presentation at the ASQC/ASA Fall Technical Conference, Lexington, KY.
  44. Mastrangelo, C. M. and D. C. Montgomery (1992), "Characterization of a Moving Centerline EWMA Control Chart," invited presentation at the ASQC/ASA Fall Technical Conference, Philadelphia, PA.
  45. Coleman, D. E. and D. C. Montgomery (1992), "A Systematic Approach to Planning for a Designed Industrial Experiment," invited paper, Technometrics Session, ASQC/ASA Fall Technical Conference, Philadelphia, PA.
  46. Montgomery, D. C. and J. E. Taggart (1993), "Selection of a Second-Order Response Surface Design," invited presentation at the SAS Users Group International Conference, New York.
  47. Montgomery, D. C., C. M. Mastrangelo and C. A. Lowry (1992), 'Statistical Process Monitoring for Dynamic Systems," invited presentation at the IIE Research Conference, Los Angeles, CA.
  48. Montgomery, D. C., C. M. Mastrangelo and C. A. Lowry (1993), "Statistical Process Monitoring for Aluminum Smelting," invited presentation at the 10th Annual Quality and Productivity Research Conference, Knoxville, TN.
  49. Montgomery, D. C. and J. A. Heinsman (1993), "Optimization of Product Formulation Using Mixture Experiments," invited presentation at the ORSA/TIMS Conference, Chicago, IL.
  50. Del Castillo, E. and D. C. Montgomery (1993), "Methods for Finite-Horizon Process Control: "Q" Charts and Alternative Techniques", presented at the ASQC/ASA Fall Technical Conference, Rochester, NY.
  51. J. B. Keats, D. C. Montgomery, G. C. Runger, and W. S. Messina (1993), "Strategies for Integrating Statistical Process Control with Feedback (PID) Controllers", presented at the ASQC/ASA Fall Technical Conference, Rochester, NY.
  52. Montgomery, D. C. (1993), "Solutions for Customer-Driven Quality Problems with Design of Experiments", invited tutorial at the Fall ORSA/TIMS Conference.
  53. Montgomery, D. C. (1993), "Planning, Conducting, and Analyzing Industrial Experiments," invited presentation at the 49th Annual Conference on Applied Statistics, Atlantic City, NJ.
  54. Montgomery, D. C. (1994), "Strategies for Integrating Statistical Process Control and Engineering Process Control", presented at the Conference on Computer Integrated Manufacturing in the Process Industries, Rutgers University.
  55. Montgomery, D. C. (1994), "The Industrial Engineer and the Quality Improvement Sciences: Have We Missed an Opportunity?", invited Keynote Address at the 8th Israeli Industrial Engineering Conference, Beer Sheva, ISRAEL.
  56. Mastrangelo, C. M., and D. C. Montgomery (1994), "Shift Detection Properties of Moving-Centerline EMWA Control Schemes", presented at the IIE Research Conference, Atlanta, GA.
  57. Montgomery, D. C. (1994), "Statistical Process Control for the Process Industries," invited short course at the Joint Statistical Meetings, Toronto, Canada, (sponsored by the Quality and Productivity Section of ASA).
  58. Montgomery, D. C. (1994), "Design of Experiments," invited short course at the 40th U.S. Army Design of Experiments Conference, U.S. Military Academy, West Point, NY.
  59. Montgomery, D. C. (1994), "Regression Analysis," invited short course at the ASQC/ASA Fall Technical Conference, Birmingham, Alabama, (sponsored by the Statistics Division of ASQC).
  60. Montgomery, D. C. (1995), "Response Surface Methods and Designs," invited short course at the ASQC/ASA Fall Technical Conference, St. Louis, MO, (sponsored by the Statistic Division of ASQC).
  61. Montgomery, D. C. (1996), "Multiple Response Optimization Methods," invited presentation at the 2nd Congress of the International Federation of Nonlinear Analysts, Athens, Greece.
  62. Montgomery, D. C., and G. C. Runger (1996), "Multivariate Control Charts and Process Monitoring", invited short course at the ASQC/ASA Fall Technical Conference, Scottsdale, AZ, (sponsored by the Statistic Division of ASQC).
  63. Montgomery, D. C. (1997), "Response Surface Methodology", invited tutorial presented at the Southern California American Statistical Association Applied Statistics Workshop, Long Beach, California.
  64. Montgomery, D. C. (1997), "Some Aspects of Generalized Linear Models for Designed Experiments", Plenary Address, Nineteenth Annual Midwest Biopharmaceutical Statistics Workshop, Ball State University, Muncie, Indiana.
  65. Sebert, D. M., Montgomery, D. C., and D. A. Rollier (1997), "Identifying Multiple Outliers and Influential Subsets in Linear Regression: A Clustering Approach", presented at the 41st Annual ASQC/ASA Fall Technical Conference, 16-17 October, Baltimore, MD.
  66. Montgomery, D. C. (1997), "Generalized Linear Models and Designed Experiments", Invited plenary presentation at the Applied Probability and Statistics Day, Johns Hopkins University Applied Physics Laboratory, 18 October, Laurel, MD.
  67. Montgomery, D. C. (1998), "Some Challenges for Industrial Statisticians", Invited Presentation at the Joint Statistical Meetings, Dallas, TX, 10 August.
  68. Montgomery, D. C. and Vining, G. G. (1998), "Methods and Applications of Generalized Linear Models", Invited Short Course presented for the Section on Engineering and Physical Sciences, Joint Statistical Meetings, Dallas, TX, 11 August.
  69. Montgomery, D. C. (1998), "Experimental Design for Process and Product Design and Development" Invited Keynote Address, Royal Statistical Society, Glasgow Scotland, 11 September.
  70. Montgomery, D. C. (1998), "Designed Experiments for Product and Process Development: Some Examples", Invited presentation at INFORMS, Seattle Washington, 27 October.
  71. Montgomery, D. C. (1998), "Some Challenges and Opportunities for Industrial Statisticians" Invited presentation at a Panel Discussion on Emerging Issues and Directions in Quality Improvement, INFORMS, Seattle Washington, 27 October.
  72. Borror, C. M., Montgomery, D. C., and Myers, R. H. (1998), "Optimal Design Strategies for Experiments Involving Noise Variables", Invited presentation at the 42nd Annual ASQC/ASA Fall Technical Conference, 22-23 October, Corning, NY.
  73. Zimmer, L. S., Montgomery, D. C., and Runger, G. C. (1998), "Some Guidelines for the Application of Adaptive Control Charts", Invited presentation at the 42nd Annual ASQC/ASA Fall Technical Conference, 22-23 October, Corning, NY.
  74. Montgomery, D. C. (1998), "A Perspective on Models and the Quality Sciences: Some Challenges and Future Directions", W. J. Youden Memorial Address presented at the 42nd Annual ASQC/ASA Fall Technical Conference, 22-23 October, Corning, NY.
  75. Montgomery, D. C. (1999), "Multiple Response Optimization Methods", Invited presentation at the Joint Statistical Meetings, Baltimore, MD, August 8-12.
  76. Vining, G. G., Kowalski, S. L. and Montgomery, D. C. (1999), "Hard-to-Change Design Variables in a Response Surface Setting", Invited presentation at the Joint Statistical Meetings, Baltimore, MD, August 8-12
  77. Montgomery, D. C. (1999), "Statistical Methods for Achieving Six-Sigma Results", Invited presentation at the Pharmaceutical and Medical Device Industries Conference on Six-Sigma, Institute of International Research, Philadelphia, PA, September 23-24.
  78. Montgomery, D. C. (1999), "Statistical Methods for Process Robustness Studies", Inyong Ham Distinguished Lecture, Department of Industrial and Manufacturing Engineering, Pennsylvania State University, November 11.
  79. Wisnowski, J. W., Montgomery, D. C. and Simpson, J. R. (1999), "A Comparative Analysis of Multiple Outlier Detection Procedures in the Linear Regression Model", Invited presentation at the 43rd Annual Fall Technical Conference, Houston Texas, October 14-15.
  80. Lanning, J., Montgomery, D. C. and Runger, G. C. (1999), "Adaptive Methods for Monitoring Fractionally Sampled Multiple Stream Processes", Invited presentation at the 43rd Annual Fall Technical Conference, Houston Texas, October 14-15.
  81. Borror, C. M., Keats, J. B. and Montgomery, D. C. (1999), "Control Charts for Low Rates of Process Nonconformance", Invited presentation at the 43rd Annual Fall Technical Conference, Houston Texas, October 14-15.
  82. Carlyle, W. M., Montgomery, D. C. and Runger, G. C. (1999), "Optimization Problems and Methods in Quality Control and Improvement", Journal of Quality Technology session - invited presentation at the 43rd Annual Fall Technical Conference, Houston Texas, October 14-15.
  83. Lewis, S. M., Montgomery, D. C. and Myers, R. H. (1999), "The Analysis of Designed Experiments using Generalized Linear Models", Invited presentation at the 43rd Annual Fall Technical Conference, Houston Texas, October 14-15.
  84. Montgomery, D. C. (2000), "Some Opportunities and Challenges for Industrial Statisticians" (Invited Keynote Address), Industrial Statistics in Action 2000, conference at the University of Newcastle-Upon-Tyne, United Kingdom, 8-10 September, 2000.
  85. Montgomery, D. C., Loredo, E. N., Jearkpaporn, D., and Testik, M. C. (2000), "Experimental Designs for Constrained Regions", Invited presentation at the 44th Annual ASQC/ASA Fall Technical Conference, Minneapolis, MN, 12-13 October, 2000.
  86. Wisnowski, J. W., Simpson, J. R., Montgomery, D. C., and Runger, G. C. (2000), "Regressor Variable Selection for Contaminated Data Sets", Invited presentation at the 44th Annual ASQC/ASA Fall Technical Conference, Minneapolis, MN, 12-13 October, 2000.
  87. Somerville, S. E., Montgomery, D. C., and Runger, G. C. (2000), "Filtering and Smoothing Methods for Mixed Particle Count Distributions", Invited presentation at the 44th Annual ASQC/ASA Fall Technical Conference, Minneapolis, MN, 12-13 October, 2000.
  88. Holcomb, D. R., Montgomery, D. C., and Carlyle, W. M. (2000), "Supersaturated Designs in Product Design and Development", Invited presentation at the 44th Annual ASQC/ASA Fall Technical Conference, Minneapolis, MN, 12-13 October, 2000.
  89. Myers, R. H. and Montgomery, D. C. (2001), "Generalized Linear Models and Response Surface Methods", Invited presentation at the ASA Quality and Productivity Research Conference, Austin TX, 22-25 May.
  90. Myers, R. H. and Montgomery, D. C. (2001), "Analysis of Designed Experiments using GLMs", Invited presentation at the Joint Statistical Meetings, Atlanta GA, 5-9 August.
  91. Heredia-Langner, A., Carlyle, W. M., and Montgomery, D. C. (2001), "Model-Robust Optimal Designs Using Genetic Algorithms", Invited Presentation at the Joint Statistical Meetings, 5-9 August, Atlanta GA.
  92. Rejavelu, G., Montgomery, D. C., and Vining, G. G. (2001), "Graphical Design Evaluation Techniques for Constrained Mixture Experiments", Invited Presentation at the 45th Annual ASQC/ASA Fall Technical Conference, 18-19 October, Toronto, Canada.
  93. Heredia-Langner, A., Carlyle, W. M., and Montgomery, D. C. (2001), "Genetic Algorithms for the Construction of D-Efficient Designs", Invited Presentation at the 45th Annual Fall Technical Conference, 18-19 October, Toronto, Canada.
  94. Holcomb, D. R., Jr. and Montgomery, D. C. (2001), "Some Difficulties in Analyzing Plackett-Burman Design with Interactions", Invited Presentation at the 45th Annual Fall Technical Conference, 18-19 October, Toronto, Canada.
  95. Montgomery, D. C. (2001), Invited Panelist for the Session "The 50th Anniversary of Response Surface Methodology", 45th Annual Fall Technical Conference, 18-19 October, Toronto, Canada.
  96. Skinner, K. R., Runger, G. C., and Montgomery, D. C. (2001), Multivariate Control Charts for Discrete Data", Invited Presentation at the 45th Annual Fall Technical Conference, 18-19 October, Toronto, Canada.
  97. Wisnowski, J. W., Runger, G. C., and Montgomery, D. C. (2001), "Enhanced Analysis of Factorial Designs with Regression Trees", Invited Presentation at the 45th Annual Fall Technical Conference, 18-19 October, Toronto, Canada.
  98. Montgomery, D. C. (2002), "A Retrospective on Response Surface Methodology", invited presentation at the Virginia Tech Conference on RSM in Honor of Professor Raymond H. Myers, Blacksburg, Virginia, 19-20 April 2002.
  99. Montgomery, D. C. (2002), "Some Thoughts About Research", Invited Presentation at the First IIE Doctoral Colloquium, Industrial Engineering Research Conference, Orlando, Florida, 18-19 May 2002.
  100. Fowler, J. A. and Montgomery, D. C. (2002), "The Future of the IERC", Presentation at the Industrial Engineering Research Conference, Orlando, Florida, 18-19 May 2002.
  101. Montgomery, D. C. (2002), "Teaching Experimental Design to Engineers: Some Experiences and Advice", Invited Presentation at the 6th International Conference on Teaching Statistics, Cape Town, South Africa, 7-12 July 2002.
  102. Kowalski, S., Borror, C. M., and Montgomery, D. C. (2002), "The Path of Steepest Ascent in Split-Plot Experiments", Contributed Presentation at the Joint Statistical Meetings, New York, 11-15 August 2002.
  103. Montgomery, D. C. (2002), "Education of Future (Industrial) Statistical Consultants", Invited Presentation at the Joint Statistical Meetings, New York, 11-15 August 2002.
  104. Jearkpaporn, D., Montgomery, D. C., Runger, G. C., and Borror, C. M. (2002), "Process Monitoring for Correlated Gamma Distributed Variables using GLM Based Control Charts", Invited Presentation at the ASQ/ASA Fall Technical Conference, Valley Forge, PA, 17-18 October 2002.
  105. Janakirim, M. and Montgomery, D.C. (2002), "Integrating Engineering Process Control and Statistical Process Control for Effective APC for Semiconductor Processes", Invited Presentation at the ASQ/ASA Fall Technical Conference, Valley Forge, PA, 17-18 October 2002.
  106. Montgomery, D. C. (2003), "Research Needs in Experimental Design", Invited Presentation at the Journal Editors' Session, INFORMS National Meeting, San Jose, CA, 18-20 November 2002.
  107. Goldfarb, H. B., Borror, C. M., Montgomery, D. C., and Anderson-Cook, C. M. (2003), "Graphical Methods to Assess the Prediction Capability of Mixture and Mixture-Process Designs", invited paper presented at the 2003 ASA Quality and Productivity Research Conference, Yorktown Heights, NY, 21-23 May 2003.
  108. Anderson-Cook, C. M., Ozol, A., Myers, R. H., and Montgomery, D. C. (2003), "Fraction of Design Space Plots for Generalized Linear Models", invited paper presented at the 2003 ASA Quality and Productivity Research Conference, Yorktown Heights, NY, 21-23 May 2003.
  109. Jearkpaporn, D., Eastman, S. A., Gonzalez-Altamirano, G., Holcomb, D. R., Heredia-Langner, A., Borror, C. M., and Montgomery, D. C. (2003), "Using Supersaturated Designed Experiments for Factor Screening and Robustness Analysis in the Design of a Semiconductor Clock Circuit ", contributed paper presented at the 2003 ASA Quality and Productivity Research Conference, Yorktown Heights, NY, 21-23 May 2003.
  110. Montgomery, D. C. (2003), "The Modern Practice of Statistics in Business and Industry", the Isobel Loutit Invited Plenary Address on Business and Industrial Statistics, 33rd Annual Meeting of the Statistical Society of Canada, Halifax, NS, 8-11 June 2003.
  111. Drain. D. C., Montgomery, D. C., and Borror, C.M. (2003), "The Application of Hybrid Heuristic Optimization in Design of Experiments", invited presentation at the Joint Statistical Meetings, San Francisco, CA 3-7 August 2003.
  112. Montgomery, D.C., Burdick, R. K., Sebert, D.M., Shah, H. K., Molnau, W., Lawson, C., Zenzen, F., and Holcomb, D. R. (2003), "Teaching Six-Sigma Concepts in a University Setting", invited presentation at the Joint Statistical Meetings, San Francisco, CA 3-7 August 2003.
  113. Robinson, T. J., Myers, R. H., and Montgomery, D. C. (2003), "Analysis Considerations in Industrial Split-Plot Experiments when the Responses are Non-normal", invited presentation at the Joint Statistical Meetings, San Francisco, CA, 3-7 August 2003.
  114. Kowalski, S., Vining, G.G., Montgomery, D.C., and Borror, C.M. (2003), Modifying a Central Composite Design to Model the Mean and Variance Within a Split-Plot Structure", invited presentation at the Joint Statistical Meetings, San Francisco, CA 3-7 August 2003.
  115. Burdick, R. K., Borror, C. M., and Montgomery, D. C. (2003), "A Review of Methods for Measurement Systems Capability Analysis", invited presentation at the Journal of Quality Technology session, 47th Annual ASA/ASQ Fall Technical Conference, El Paso, TX, 16-17 October.
  116. Drain, D. C., Borror, C. M., Montgomery, D. C., and Anderson-Cook, C. M. (2003), "The Effect of Correlated Noise Variables on Designed Experiments", invited presentation at the 47th Annual ASA/ASQ Fall Technical Conference, El Paso, TX, 16-17 October 2003.
  117. Goldfarb, H. B., Anderson-Cook, C. M., Borror, C. M., and Montgomery, D. C. (2003), "Graphical Methods to Assess the Prediction Capability of Mixture and Mixture-Process Designs", invited presentation at the 47th Annual ASA/ASQ Fall Technical Conference, El Paso, TX, 16-17 October 2003.
  118. Montgomery, D. C. (2004), "Statistics and Statisticians in Today's Business World", keynote address, Royal Statistical Society Conference on Business Improvement Through Statistical Thinking, 21-22 April, Coventry, UK.
  119. Montgomery, D. C. (2004), "Designing Experiments: Some Adventures and Lessons Learned", invited seminar at the Industrial Statistics Research Center, University of Newcastle-Upon-Tyne, 23 April, Newcastle-Upon-Tyne, UK.
  120. Montgomery, D. C. (2004), "Six Sigma: New Directions for DOX", invited presentation at the 2004 Quality and Productivity Research Conference, 19-21 May, Durham, NC.
  121. Montgomery, D. C., Jearkpaporn, D., Runger, G. C., and Borror, C. M. (2004), "Monitoring Mean Shifts for Multistage Processes using Generalized Linear Models", invited presentation at the Joint Statistical Meetings, Toronto, CA 8-12 August.
  122. Kowalski, K. M., Vining, G. G., Montgomery, D. C. and Borror, C. M. (2004), Modeling the Process Mean and variance from a CCD", contributed paper presentation at the Joint Statistical Meetings, Toronto, CA 8-12 August.
  123. Woodall, W. H., Spitzner, D., Montgomery, D. C., and Gupta, S. (2004), "Using Control Charts to Monitor Product and Process Quality Profiles", invited presentation at the Joint Statistical Meetings, Toronto, CA 8-12 August.
  124. Holcomb, D. R., Montgomery, D. C., and Lurponglukana, N. (2004), "A Bootstrap Method for Determining Active factors in Unreplicated Factorial Designs", invited paper presented at the 48th ASA/ASQ Fall Technical Conference, Roanoke, VA, 14-15 October.
  125. Chung, J., Goldfarb, H. B., and Montgomery, D. C. (2004), "Statistical Designs for Mixture-Process Variable Experiments with Control and Noise Variables", invited paper presented at the 48th ASA/ASQ Fall Technical Conference, Roanoke, VA, 14-15 October.
  126. Heredia-Langner, A., Montgomery, D. C., Carlyle, W. M., and Borror, C. M. (2004), "Model-Robust Optimal Designs: A Genetic Algorithm Approach", invited paper presented in the Journal of Quality Session at the 48th ASA/ASQ Fall Technical Conference, Roanoke, VA, 14-15 October.
  127. Robinson, T. J., Wulff, S. S., Montgomery, D. C., and Kurhi, A. I (2004), "A Response Surface Approach to Robust Parameter Design using Generalized Linear Models", invited paper presented at the 48th ASA/ASQ Fall Technical Conference, Roanoke, VA, 14-15 October.
  128. Park, You-Jin, Richardson, D. E., Borror, C. M., Anderson-Cook, C. M., and Montgomery, D. C. (2004), "Prediction Variance Properties of Second-Order Response Surface Designs for Cuboidal Regions", invited paper presented at the 48th ASA/ASQ Fall Technical Conference, Roanoke, VA, 14-15 October.
  129. Montgomery, D. C. (2005), "Statistics and the Transformation of Science, Business and Industry", invited keynote presentation at the 5th Annual ENBIS Conference, University of Newcastle, Newcastle-Upon-Tine, UK, 14-16 September, 2005.
  130. Montgomery, D. C. and Goldfarb, H. B. (2005),"Graphical Methods for the Evaluation of Mixture and Mixture-Process Designs", invited presentation in the 50th anniversary of mixture experiments session, Joint Statistical Meetings, Minneapolis, MN, 7-11 August, 2005.
  131. Montgomery, D. C. (2005), "Criteria for Designing Experiments: Some Practical Considerations", invited presentation at the Los Alamos National Labs Design and Analysis of Experiments Conference, Santa Fe, NM,.11-14 October, 2005.
  132. Lawson, C. A. and Montgomery, D. C. (2005), "Business Process Characterization using Categorical data Models", invited presentation at the 49th Annual ASA/ASQ Fall Technical Conference, St. Louis MO, 20-21 October, 2005.
  133. Montgomery, D. C. (2005), "Some Trends in Six-Sigma Education", invited presentation at the 49th Annual ASA/ASQ Fall Technical Conference, St. Louis MO, 20-21 October, 2005.
Other Publications
  1. Montgomery, D. C. and W. L. Berry (Editors) (1974), Production Planning and Control: Concepts, Techniques and Systems, Production Planning and Control Division Monograph No. 1, American Institute of Industrial Engineers.
  2. Montgomery, D. C. (1971), "Simulation Predicts Product Behavior," Machine Design.
  3. Montgomery, D. C. (1968), review: Operations Research and the Design of Management Information Systems, J. F. Pierce, ed., The Journal of Industrial Engineering, Vol. 19, No. 4.
  4. Montgomery, D. C. (1968), review: Fundamentals of Operations Research, Ackoff and Sasieni, The Journal of Industrial Engineering, Vol. 19, No. 7.
  5. Montgomery, D. C. (1969), review: Queuing Theory, J. A. Panico, in: Industrial Engineering, Vol. 1.
  6. Montgomery, D. C. (1970), review: Theory of Games and Strategies, Levin and DesJardins, in: Industrial Engineering, Vol. 2, No. 7.
  7. Montgomery, D. C. (1970), review: An Illustrated Guide to Linear Programming, S.I. Gass, in: Industrial Engineering, Vol. 12, No. 8.
  8. Johnson, L. A. and D. C. Montgomery (1973), review: An Introduction to Production and Inventory Control, and Production and Inventory Control: Theory and Practice, R. W. Van Ness and W. Monhemius , in: Industrial Engineering, Vol. 5, No. 12.
  9. Montgomery, D. C. (1975), review: Industrial Systems: Planning, Analysis, and Control, David D. Bedworth, in: Industrial Engineering, Vol. 7, No. 1.
  10. Montgomery, D. C. (1975), review: Engineering Mathematics, A. C. Bajapi, L. R. Mustoe and D. Walker, In: Industrial Engineering, Vol. 7, No. 1.
  11. Montgomery, D. C. (1977), review: Fundamentals of Finite Mathematics, R. L. Childress, in: Interfaces, Vol. 8, No. 1.
  12. Montgomery, D. C. (1977), review: Statistical Methods for Digital Computers, K. Enslein, A. Ralstan and H. S. Wolf, eds., in: TIMS Interfaces.
  13. Montgomery, D. C. (1980), review: Practical Experiences with Modeling and Forecasting Time Series, G. M. Jenkins, In: Journal of Quality Technology, Vol. 12, No. 1.
  14. Montgomery, D. C. (1981), review: Dynamic Regression: Theory and Algorithms, M. H. Pearson and L. J. Slater, in: Journal of Quality Technology, Vol. 13, No. 1.
  15. Heikes, R. G. and D. C. Montgomery (1981), "Productivity is Enhanced by Statistical Quality Control," Industrial Engineering, Vol. 13, No. 3.
  16. Montgomery, D. C. (1988), "Experimental Design and Product and Process Development," Manufacturing Engineering, Vol. 101, No. 3, September.
  17. Montgomery, D. C. (2000), "A Meeting for Industrial Statisticians", Editorial in Quality and Reliability Engineering International, Vol. 16, No. 2.
  18. Montgomery, D. C. (2000), "The Present State of Industrial Statistics", Editorial in Quality and Reliability Engineering International, Vol. 16, No. 4.
  19. Borror, C. M., Montgomery, D. C., and Runger, G. C. (2000), "Statistical Experimental Design - Some Recent Advances and Applications", Editorial in Quality and Reliability Engineering International, Vol. 16, No. 5.
  20. Montgomery, D. C. (2001), "Some Thoughts on ISO/QS Registration", Editorial in Quality and Reliability Engineering International, Vol. 17, No. 1.
  21. Montgomery, D. C. (2001), "Beyond Six-Sigma", Editorial in Quality and Reliability Engineering International, Vol. 17, No. 4.
  22. Montgomery, D. C. (2001), "Research in Industrial Statistics - Part I", Editorial in Quality and Reliability Engineering International, Vol. 17, No. 6.
  23. Montgomery, D. C. (2002), "Research in Industrial Statistics - Part II", Editorial in Quality and Reliability Engineering International, Vol. 18, No. 2.
  24. Montgomery, D. C. (2002), "Changing Roles for the Industrial Statistician", Editorial in Quality and Reliability Engineering International, Vol. 18, No. 5.
  25. Montgomery, D. C. (2003), "Education for Industrial Statisticians", Editorial in Quality and Reliability Engineering International, Vol. 19, No. 1.
  26. Montgomery, D. C. (2003), review: The Mahalanobis-Taguchi Strategy, G. Taguchi and R. Jugulum, in: Journal of Quality Technology, Vol. 35, No. 2.
  27. Montgomery, D. C. (2003), "Quality Improvement and Economic Growth", Editorial in Quality and Reliability Engineering International, Vol. 19, No. 3, pp. iii.
  28. Montgomery, D. C. (2003), "Corporate Ethics and Quality", Editorial in Quality and Reliability Engineering International, Vol. 19, No. 6, pp. iii-iv.
  29. Montgomery, D. C. (2004), "Improving Business Performance: Project-by-Project", Editorial in Quality and Reliability Engineering International, Vol. 20, No. 4, pp. iii.
  30. Montgomery, D. C. (2004), "Selecting the Right Improvement Projects", Editorial in Quality and Reliability Engineering International, Vol. 20, No. 7, pp. iii-iv.
  31. Montgomery, D. C. (2005), "Changing of the Guard", Editorial in Quality and Reliability Engineering International, Vol. 21, No. 1, pp. iii.
  32. Montgomery, D. C. (2005), "Generation III Six Sigma", Editorial in Quality and Reliability Engineering International, Vol. 21, No. 6, pp. iii-iv.
  33. Brombacher, A. C. and Montgomery, D. C. (2005), "News from Newcastle: Product Quality from a Customer Perspective", Editorial in Quality and Reliability Engineering International, Vol. 21, No. 8, pp. iii.
  34. Montgomery, D. C. and Brombacher, A.C. (2006), "Carol J. Feltz and David Newton", Editorial in Quality and Reliability Engineering International, Vol. 22, No. 2, pp. i.

Top
Copyright © 2000 - 2006 Arizona State University Ira A. Fulton School of Engineering | Privacy Statement | Accessibility | Webmaster |